Description

Front left-hand door bottom for Land Rover Series 2, fitted from 1958 until the introduction of the Series 3 in 1971. This Anti-burst model offers the upgraded door lock system which you see on the later doors.

British made and manufactured to closely follow the design and contours of the original Land Rover part. Our replacement door bottoms are produced using a heavy-duty aluminium outer skin with a steel frame. The aluminium skin is bonded to the frame, rather than simply fixed mechanically, therefore providing a clean and durable replacement for your restoration.

We supply the panel pre-etched*, ready for preparation and topcoating with Paintman Coach Enamel.

Fitment

Vehicle: Land Rover Series 2
Position: Front Door
Side: Left hand (LH) / Nearside
Years: 1958-1971, up to the introduction of the Series 3
Construction: Heavy-duty aluminium skin with steel frame
Finish: Etch primed*

Need the right-hand side?

We sell that here 337791ANTI Land Rover Series 2 Door Bottom Anti burst – Front RH.

Need help?

If you’re unsure, we’re here to help. Please contact our team if you need to check whether this is the correct panel for your Land Rover or need any further information before ordering.

*The colour of the etch primer may vary.

Paint Info

Aerosol Paint

Upgrade your new panel purchase with convenient, ready-to-spray paint – no mess, no mixing, just spray and go.

Why choose this aerosol paint pack:

Simple spray application – The paint is already blended with the correct amount of thinners, so there’s no measuring or mixing involved.
Premium 1k finish – Expect a high-gloss, durable, tough finish with excellent coverage, good build, and strong resistance to water, weather, and exterior conditions.
Sheen options – Available in Gloss – this is the standard sheen for LR colours.
Colour options – Available in all of the standard LR S2&3 colours – LRC006 Marine Blue, LRC005 Pastel Green, LRC001 Deep Bronze Green, LRC008 Mid Grey, LRC007 Limestone (please contact us if you require anything different.)
Quick and convenient for panel buyers – Rather than sourcing paint separately, you can now buy both the etch-primed panel and the paint in one go, simplifying your restoration build and ensuring colour-match convenience. We recommend overcoating the etch primer with our filler primer and then topcoat.

How It Works – “Panel + Paint” in One Cart

When you add one of our Land Rover panels to your basket, you’ll now have the option to include an aerosol as an add-on. This means:

Buy your etch primed panel (e.g. door top, wing)
Select your preferred paint colour with the aerosol add on.
Receive both in the same delivery – ready for you to prepare, mask up and spray.

It’s ideal for anyone who wants a clean, ready-to-paint panel and doesn’t want the hassle of sourcing paint separately. Great for restorations, repairs or full-panel replacements – and especially useful if you want a good-quality, professional-looking finish with minimal fuss.

Paint Coverage

Each 400ml aerosol covers roughly 2 sqm (we do recommend doing 2 coats) – enough to cover most standard panels.

- Door Tops
  - Outside – 1 Aerosol
  - Inside & Outside – 1-2 Aerosols
- Door Bottoms
  - Outside – 1 Aerosol
  - Inside & Outside – 2 Aerosols
- Front Wing Assembly
  - Outside – 2 Aerosol
  - Inside & Outside – 4 Aerosols
- Rear Quarter Panel
  - Outside – 1 Aerosol
  - Inside & Outside – 1 Aerosols
- Rear Door
  - Outside – 2 Aerosol
  - Inside & Outside – 3 Aerosols
- Lower Tailgate Assembly
  - Outside – 1 Aerosol
  - Inside & Outside – 2 Aerosols
- Radiator Panel
  - Outside – 1 Aerosol
  - Inside & Outside – 2 Aerosols
- Sidelamp Panel
  - Outside – 1 Aerosol
  - Inside & Outside – 1 Aerosols
- Front Wing Outer
  - Outside – 1-2 Aerosol
  - Inside & Outside – 2-3 Aerosols
- Rear Outer Skin
  - Outside – 2 Aerosol
  - Inside & Outside – 3-4 Aerosols